-
+91 22 66394868
Call Us
-
exports@nitronalloys.com
Email Us
-
+91 9819903231
Chat With Us
- REQUEST A QUOTE
Super duplex 2507 plate
Top notch ASTM A240 UNS S32750 coil supplier in India
Table of Content
- Super duplex 2507 plate specification
- Available types of 2507 stainless steel sheet
- ASTM A240 UNS S32750 coil chemical composition
- DIN 1.4410 rolling sheets mechanical properties
- Alloy 2507 perforated plate equivalent grade
- SDSS 2507 hot rolled plate physical properties
- Price list of super duplex 2507 plate
- Toughness Values of UNS S32760 flat sheet
- Application of SAF 2507 strip
- Size chart of Alloy 2507 cold rolled plate
- SAF 2507 Shim Sheet finishes
- Super duplex 2507 plate Dimensions
ASTM A240 UNS S32750 cold rolled plate and 2507 stainless steel sheet can handle highly corrosive conditions
Sizes
Length: upto 12000 mm
Thickness: 1 to 100 mm
Width: 1000 to 2500 mm
ASTM A240 UNS S32750 coil Origin
Indian
Korea
Japanese
US
European
2507 stainless steel sheet Testing certificates
NABL Approved Lab Reports
EN 10204 3.1
Free quote
Testing report
Mill Test Certificate
Types
Flat shim/ sheet
Plate
Flats
Coils
Plain sheet
Rolling plate/ sheet
Sheet
Clad Plate
Strip
Foils
Alloy 2507 perforated plate Method of machining
Reaming
Sawing and Cutting Off
Drilling
Grinding
Milling
Tapping and Threading
Planning and Shaping
Turning
Hardness
Spring Hard
Soft
Hard
Quarter Hard
Half Hard
Package
Waterproof paper
Wooden Pallet
Brown Paper
25cr super duplex slitting coil Delivery Condition
Hot-rolled
Annealed
Heat treated
Super duplex 2507 plate Cutting
Oxy-propane Flame
Waterjet
Laser
Plasma
UNS S32760 flat sheet Surface Finish
2B
Hairline
No.1
No 1D
Pickled
NO(8)
Edges
Round edge
Slit edge
Deburred edge
Mill edge
Trimmed edge
Cutting edge
Square edge
SAF 2507 strip Testing
Mechanical Testing
Intergranular Corrosion Test
Chemical Analysis
Flaring Test
Flattening Test
Hardness Test
DIN 1.4410 hot rolled plate
SA 240 UNS S32760 perforated sheet
Alloy 2507 flat sheet
ASTM A240 UNS S32760 cold rolled plate
Super Duplex 2507 foil
2507 duplex stainless steel rolling plate
1.4410 super duplex flat shim
ASTM A240 UNS S32750 thin strips
25cr sdss slitting coil
SDSS 2507 rolling sheets
2507 super duplex stainless steel shims
25cr super duplex coil
SAF 2507 polished plate
ASTM A240 Type 2507 chequered plate
2507 stainless steel strips
DIN 1.4410 rolling sheets and Alloy 2507 perforated plate are widely used in food processing equipment
| N | Cr | Cu | Ni | Si | C | Mn | Mo | S | P | Fe |
|---|---|---|---|---|---|---|---|---|---|---|
| .24-.32 | 24.0-26.0 | 0.50 Max | 6.0-8.0 | 0.80 Max | 0.030 Max | 1.20 Max | 3.0-5.0 | 0.020 Max | 0.035 Max | Balance |
| Min .2% Yield Strength, ksi Minimum | Tensile Strength, ksi | Hardness (HRB) Max. | % Elongation Min. |
|---|---|---|---|
| 80 | 116 | 310 | 15 |
| Grade | UNS | WNR |
|---|---|---|
| 2507 | S32750 / S32760 | 1.4410 |
| Density, lb/in3 | Modulus of Elasticity, psi | Coefficient of Thermal Expansion, 68-212˚F, /˚F | Thermal Conductivity, Btu/ft hr ˚F | Specific Heat, Btu/lb ˚F | Electrical Resistivity, Microhm-in |
|---|---|---|---|---|---|
| 0.280 | 29.0x 106 | 7.5 x 10-6 | 8 | 0.12 | 31.5 |
| Product | Price in US ($) | Price in Saudi Arabia |
|---|---|---|
| Super duplex 2507 cold rolled sheet - Size 1220X2440 – Thickness 0.8mm | US $48.60 | 178.50 SAR |
| 1220X2440 – Thickness 1.6mm SAF 2507 plate | US $91.80 | 337.17 SAR |
25cr super duplex slitting coil and SDSS 2507 hot rolled plate are manufactured by hot rolling or cold drawing process
| Temperature | -60°F | -50°C | +20°C | +70°F |
|---|---|---|---|---|
| Single | 54 ft. lbs | 75 J/cm_ | 90 J/cm_ | 65 ft. lbs |
| Average (5) | 65 ft. lbs | 90 J/cm_ | 150 J/cm | 87 ft. lbs |
To cut SAF 2507 Strip and UNS S32760 Flat Sheet diamond saw blade is used
- Oil and gas industry
- Marine Applications
- Pulp & Paper
- Desalination Equipment
- Offshore Oil production
- Petroleum industry
| Grade (mm) |
Theoretical weight (kg/m) |
|---|---|
| 0.35 | 2.748 |
| 0.5 | 3.925 |
| 0.55 | 4.318 |
| 0.6 | 4.71 |
| 0.65 | 5.103 |
| 0.7 | 5.495 |
| 0.75 | 5.888 |
| 0.8 | 6.28 |
| 0.9 | 7.065 |
| 1 | 7.85 |
| 1.2 | 9.42 |
| 1.3 | 10.205 |
| 1.4 | 10.99 |
| 1.5 | 11.775 |
| 1.6 | 12.56 |
| 1.8 | 14.13 |
| 2 | 15.7 |
| 2.2 | 17.27 |
| 2.5 | 19.625 |
| 2.8 | 21.98 |
| 3 | 23.55 |
| 3.2 | 25.12 |
| 3.5 | 27.475 |
| 3.8 | 29.83 |
| 3.9 | 30.615 |
| 4 | 31.4 |
| 4.5 | 35.325 |
| 5 | 39.25 |
| 6 | 47.1 |
| 7 | 54.95 |
| 8 | 62.8 |
| 9 | 70.65 |
| 10 | 78.5 |
| 11 | 86.35 |
| 12 | 94.2 |
- Hot rolled
- Cold rolled
- 2B
- 2D
- BA NO(8)
- SATIN
|
Surface finish |
Thickness (mm) |
Width (mm) |
|---|---|---|
|
2H – Work hardened |
0.4–6.35 |
max. 1524 |
|
2B – Cold rolled, heat treated, pickled, skin passed |
0.25–8.0 |
max. 2032 |
|
2E – Cold rolled, heat treated, mechanically descaled |
0.4–8.0 |
max. 2032 |
|
2D – Cold rolled, heat treated, pickled |
0.4–6.35 |
max. 1524 |
|
Polished, Brushed |
0.5–4.0 |
max. 1524 |
|
2R – Cold rolled, bright annealed |
0.25–3.5 |
max. 1524 |